top of page

Bespoke Exhibition Stand Builders in London

Bespoke island and space-only exhibition stands, designed, built and installed by one accountable London team.

​

PopHaus designs and builds bespoke exhibition stands for brands, tourism boards and agencies at Olympia, ExCeL, the NEC and venues across the UK. From island stands with self-supported canopies to feature areas and organiser stages, every stand is run end-to-end by one PopHaus producer, with fabrication in our own workshop in Brentford, West London, 18 minutes from Olympia. We build to each hall's height, rigging and stand-plan rules and hand over a finished stand before doors open.

Our model is straightforward: a single accountable producer leads the stand plan, design, structural sign-off, supplier coordination, install, show support and de-rig, while fabrication is handled in-house in Brentford. AV, lighting and furniture come from trusted hire partners and are built into the stand, not bolted on afterwards. One contact, one costed quote and no gaps between suppliers.

azerbaijan-tourism-stand-gondola-chairlift-selfie-station-olympia-london.jpg

Share your floorplan, stand number, show dates and any design references, and we'll respond within one working day with initial thoughts, questions and a costed response. No brief fees, fixed-price quotes against signed-off scope. We also manage install, de-rig and storage between shows, so your stand can be reused across a full season.

What we build

Eight stand formats cover most of the exhibition briefs we receive. Every stand is bespoke, built to your plot, your hall's rules and your brand, then fabricated in-house at our own workshop in Brentford, West London, and designed so it can be stored and reused for your next show.

Island stands

Open-sided stands that work from every angle, with central storage towers, LED screens, lightboxes and self-supported canopies or 3D lettering overhead. We plan the layout so visitors can walk in from any aisle, and engineer every overhead element to stand on the structure itself where the hall does not allow rigging from the roof.

Space-only stands

Fully bespoke stands built on bare floor space, from 6m x 6m upwards. Built walls, raised floors with hidden power, back-wall graphics with 3D letters, product display and meeting areas, all fabricated in our workshop and pre-built before show week so the install is fast and predictable.

Shell scheme upgrades

Turn a standard shell scheme into a branded space without the cost of a full build. Wall graphics, counters, screen mounts, shelving and lighting, produced and installed to the organiser's rules. Ideal for back-to-back shows where the same kit needs to travel.

Feature areas and organiser stages

Hero features, stages and seminar areas for show organisers and headline partners. Stage decks, branded backdrops, LED walls coordinated with AV hire partners, and seating layouts planned around visitor flow, sight lines and the hall's fire routes.

Counters, bars and reception points

Reception counters, curved bar and cafe counters, and partner counters with integrated lightboxes. Built in timber, laminate or spray-finished MDF, with lockable storage and cable management so the stand stays clean on camera and easy to run during the show.

Canopies, towers and branding

Self-supported round or square canopies, branding towers and 3D lettering that make the stand visible from across the hall. Every overhead element is engineered to stand on the structure, inside the hall's maximum build height, with calculations ready for the organiser.

Interactive moments

Selfie stations, games, spin-to-win wheels and product challenges that pull visitors onto the stand and keep them there. We design, build and install the activation as part of the stand, so it is safe, branded and ready to run from the moment doors open.

Reusable and modular stands

Stands designed to be built once and used across a season of shows. Modular panels, travel-cased graphics and repeatable layouts that adapt to different plot sizes, with storage between shows in our West London workshop so the next install is quicker and cheaper.

How a bespoke exhibition stand gets built at PopHaus

Six steps from floorplan to de-rig. Ideally we start 8 to 12 weeks before the show, and one producer stays with your stand from the first sketch to the moment it leaves the hall.

Step 1: Brief, floorplan and stand rules

Every stand starts with your plot, stand number, show dates and the hall's rules: maximum build height, rigging, open sides and fire routes. We review the organiser's manual and floorplan, then confirm what the stand needs to do for you on the day.

Step 2: Design and costed proposal

We produce a stand layout and visuals redrawn to your real plot, with materials, finishes and AV positions marked up, plus a fully costed proposal. Structural elements such as canopies and towers are checked so the organiser's approval goes through first time.

Step 3: Workshop fabrication

Once the design is signed off, the stand is built in our Brentford workshop. Walls, counters, towers and canopies are fabricated, finished and pre-assembled where possible, so problems are solved in the workshop rather than on the show floor. PopHaus runs supplier coordination, quality control and snagging, so you only ever have one point of contact.

Step 4: Graphics, AV and finishing

Brand-matched paint, laminates and printed graphics, with lightboxes, LED screens and lighting coordinated with trusted hire partners. Lighting colour is set to your brand, and every cable route is planned before we arrive on site.

Step 5: Transport, install and handover

Transport is booked to the hall's delivery slots and the stand is installed by our own crew within the build-up window. We hand over a finished, clean stand to your team, ideally a full day before doors open, with a walk-through of everything on it. Full detail on our event installation and de-rig service.

Step 6: De-rig, storage and reuse

Clean de-rig within the breakdown window, leaving the plot as the organiser requires. Reusable elements return to our West London workshop for storage, ready for your next show, and anything that cannot be reused is recycled or disposed of responsibly. See event logistics, storage and reuse for the full process.

Recent exhibition stand work

National tourism board, Olympia London: an 8m x 5m island stand with a self-supported round canopy and 3D lettering, a central LED tower, four partner counters and a ski challenge activation.

​

Healthcare technology brands, NEC Birmingham: branded shell scheme upgrades with wall graphics, counters and screens, delivered across back-to-back shows.

​

For a portfolio matched to your show, email hello@pophaus.co.uk.

How much does a bespoke exhibition stand cost in London?

Cost depends on stand size, the number of open sides, finishes, AV and how many shows the stand needs to work across. Our projects start from £10k. Send us your floorplan and show dates and we will come back with a fully costed response within one working day.

Why brands and agencies brief PopHaus for exhibition stands

Six reasons brands, agencies and show organisers brief PopHaus for their exhibition stands rather than splitting the work across multiple suppliers:

  • Single accountable producer. One project lead from sketch to de-rig. We run the workshop, quality checks, install scheduling and show support so you only ever talk to one person.

  • Right workshop, every time. Our own workshop in Brentford, West London means we bring the right specialist skills to each brief in-house not whoever happens to have capacity. CNC for tight tolerances, fibreglass for sculptural pieces, vac-form for complex curves, steel for structural builds.

  • Built for the show floor. Every stand is designed around visitor flow, sight lines from the aisles and the hall's rules, so it works on the day and passes organiser checks first time.

  • Travels safely. Bolt-together modular sections engineered for transit between venues. We've moved large-scale builds across the UK festival circuit and to European product launches without on-site rework.

  • White-label as standard. Crew arrive in unbranded blacks, site hoarding is unbranded, NDA signed by default, credit stays with your agency.

  • Documented compliance. Structural calcs, fire-retardant material certificates, RAMS, CDM 2015 paperwork all supplied as standard. Venue, local authority and insurer sign-off pack ready on request.

Venues we build exhibition stands for

Our Brentford workshop is 18 minutes from Olympia, so London shows are our home ground. We also build at major exhibition venues across the UK:

  • Olympia London, Grand Hall, National Hall and Olympia Central

  • ExCeL London, all halls

  • Business Design Centre, Islington

  • Battersea Evolution and Tobacco Dock

  • Old Truman Brewery and East London event spaces

  • NEC Birmingham

  • Manchester Central

  • CBS Arena Coventry and other UK venues

Scenic fabrication partner for stand builders

Already have a stand contractor? We work as a white-label scenic fabrication partner for exhibition stand builders and agencies across London and the UK. Feature walls, hero pieces, CNC-cut lettering and logos, curved and sculptural scenic, and organiser feature areas, built in-house in our workshop to your drawings and delivered ready to fit at Olympia, ExCeL, the NEC and beyond. Unbranded crew, NDAs as standard, and one PopHaus contact from CAD pack to show day.

Frequently asked questions

Get a costed response within one working day

Share your floorplan and show dates and we will come back with a fully costed exhibition stand response within one working day. Fixed-price quote, scope of work, timeline, workshop availability. No obligations, no brief fee.

bottom of page